WSPHI - APMonitor Option

Main.OptionWsphi History

Show minor edits - Show changes to output

June 19, 2021, at 08:50 PM by 136.36.4.38 -
Changed line 14 from:
See also [[Main/OptionSphi|SPHI]], [[Main/OptionSplo|SPLO]], [[Main/OptionWsplo|WSPLO]]
to:
See also [[Main/OptionSphi|SPHI]], [[Main/OptionSplo|SPLO]], [[Main/OptionWsplo|WSPLO]], [[Main/OptionWsp|WSP]]
Restore
June 19, 2021, at 08:47 PM by 136.36.4.38 -
Changed line 8 from:
 Default Value: 1.0
to:
 Default Value: 20.0
Restore
June 08, 2017, at 11:06 PM by 10.5.113.159 -
Changed line 14 from:
See also [[Main/Sphi|SPHI]], [[Main/Splo|SPLO]], [[Main/Wsplo|WSPLO]]
to:
See also [[Main/OptionSphi|SPHI]], [[Main/OptionSplo|SPLO]], [[Main/OptionWsplo|WSPLO]]
Restore
June 08, 2017, at 11:06 PM by 10.5.113.159 -
Changed lines 5-6 from:
%width=50px%Attach:cv.png
to:
%width=50px%Attach:cv.png [[Main/DbsVariable|Local Options]] | %width=30px%Attach:apm.png [[Main/DbsGlobal|Global Options]]
Added lines 13-14:

See also [[Main/Sphi|SPHI]], [[Main/Splo|SPLO]], [[Main/Wsplo|WSPLO]]
Restore
June 01, 2017, at 06:42 AM by 45.56.3.173 -
Changed lines 9-10 from:
 Description: Objective function weight on upper set point for linear error model
to:
 Description: Objective function weight on upper set point
             for linear error model
Restore
June 01, 2017, at 06:42 AM by 45.56.3.173 -
Added lines 1-11:
(:title WSPHI - APMonitor Option:)
(:keywords WSPHI, Optimization, Estimation, Option, Configure, Default, Description:)
(:description Objective function weight on upper set point for linear error model:)

%width=50px%Attach:cv.png

 Type: Floating Point, Input
 Default Value: 1.0
 Description: Objective function weight on upper set point for linear error model

A weighting factor to penalize deviation above the upper setpoint trajectory with final target SPHI. If there is no penalty to cross the upper setpoint, WSPHI can be set to zero.
Restore
💬