SPHI - APMonitor Option
Main.OptionSphi History
Hide minor edits - Show changes to output
Changed line 11 from:
The upper range of the target region (dead-band) for a controller that is using an l1-norm error objective. The setpoint high (SPHI) is the upper final target value.
to:
The upper range of the target region (dead-band) for a controller that is using an l1-norm error objective. The setpoint high (SPHI) is the upper final target value. SPHI and SPLO are used with IMODE=3,6,9 when APM.CV_TYPE=1. The single set point SP is used with APM.CV_TYPE=2.
Added lines 12-13:
See also [[https://apmonitor.com/do/index.php/Main/ControllerObjective|Controller Objective]], [[Main/OptionSp|SP]], [[Main/OptionSplo|SPLO]]
Changed line 5 from:
%width=50px%Attach:cv.png
to:
%width=50px%Attach:cv.png [[Main/DbsVariable|Local Options]] | %width=30px%Attach:apm.png [[Main/DbsGlobal|Global Options]]
Added lines 1-11:
(:title SPHI - APMonitor Option:)
(:keywords SPHI, Optimization, Estimation, Option, Configure, Default, Description:)
(:description Set point high for linear error model:)
%width=50px%Attach:cv.png
Type: Floating Point, Input
Default Value: 1.0e20
Description: Set point high for linear error model
The upper range of the target region (dead-band) for a controller that is using an l1-norm error objective. The setpoint high (SPHI) is the upper final target value.
(:keywords SPHI, Optimization, Estimation, Option, Configure, Default, Description:)
(:description Set point high for linear error model:)
%width=50px%Attach:cv.png
Type: Floating Point, Input
Default Value: 1.0e20
Description: Set point high for linear error model
The upper range of the target region (dead-band) for a controller that is using an l1-norm error objective. The setpoint high (SPHI) is the upper final target value.