SPHI - APMonitor Option

Main.OptionSphi History

Show minor edits - Show changes to output

Changed line 11 from:
The upper range of the target region (dead-band) for a controller that is using an l1-norm error objective. The setpoint high (SPHI) is the upper final target value.
to:
The upper range of the target region (dead-band) for a controller that is using an l1-norm error objective. The setpoint high (SPHI) is the upper final target value. SPHI and SPLO are used with IMODE=3,6,9 when APM.CV_TYPE=1. The single set point SP is used with APM.CV_TYPE=2.
June 26, 2017, at 12:49 PM by 71.83.242.189 -
Added lines 12-13:

See also [[https://apmonitor.com/do/index.php/Main/ControllerObjective|Controller Objective]], [[Main/OptionSp|SP]], [[Main/OptionSplo|SPLO]]
June 08, 2017, at 10:40 PM by 10.5.113.159 -
Changed line 5 from:
%width=50px%Attach:cv.png
to:
%width=50px%Attach:cv.png [[Main/DbsVariable|Local Options]] | %width=30px%Attach:apm.png [[Main/DbsGlobal|Global Options]]
June 01, 2017, at 06:35 AM by 45.56.3.173 -
Added lines 1-11:
(:title SPHI - APMonitor Option:)
(:keywords SPHI, Optimization, Estimation, Option, Configure, Default, Description:)
(:description Set point high for linear error model:)

%width=50px%Attach:cv.png

 Type: Floating Point, Input
 Default Value: 1.0e20
 Description: Set point high for linear error model

The upper range of the target region (dead-band) for a controller that is using an l1-norm error objective. The setpoint high (SPHI) is the upper final target value.